SAE J1138 Design Criteria Driver Hand Controls Location for Passenger Cars, Multipurpose Passenger Vehicles, and Trucks

作者:标准资料网 时间:2024-05-04 19:28:57   浏览:8549   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE J1138
Title:Design Criteria Driver Hand Controls Location for Passenger Cars, Multipurpose Passenger Vehicles, and Trucks (10 000 GVW and Under)
Issuing Committee:Controls And Displays Standards Committee
Scope:The purpose of this SAE Recommended Practice is to describe design criteria pertaining to the location and labeling of hand controls, including embedded displays and controls when displayed, necessary to or frequently used during the operation of passenger cars, MPVs, and trucks 10 000 GVW and under designed for left-hand drive operation. The results of SAE human factors research have strongly influenced these recommendations, specifically in the area of driver reach, control-locating performance, and control location expectancies. Deviations from this recommended practice should be made only after careful study of the various SAE publications on these subjects. This document does not include hand-held devices such as remote controls or cellular phones.
下载地址: 点击此处下载
【英文标准名称】:Specificationforswitchesupto750V63A;amendmenttoVDE0632/9.67:particularrequirementsforelectronicactuatingswitches(dimmersandspeedregulators)upto250Va.c.andupto16AVDESpecification
【原文标准名称】:750V、63A以下的开关.电器调节开关(调光器.转速调节器)250V和16A以下的特殊规定
【标准号】:DINVDE0632q-1979
【标准状态】:作废
【国别】:德国
【发布日期】:1979-04
【实施或试行日期】:1979-04
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:低电压;性能;熔断器;调光开关;额定功率;转速调整器;定义;电气工程;预算;作标记;电力设备;开关;开关设备;干扰抑制;衰减器;温度;频率;半导体;电子工程
【英文主题词】:
【摘要】:
【中国标准分类号】:L22
【国际标准分类号】:1230
【页数】:17P;A4
【正文语种】:德语


Product Code:SAE J1288
Title:Packaging, Storage, and Shelf Life of Hydraulic Brake Hose Assemblies
Issuing Committee:Automotive Brake And Steering Hose Standards Comm
Scope:This SAE Information Report is the listing of recommendations for the proper packaging, storage, and shelf life limitations of new and unused hydraulic brake hose assemblies. The document embodies the testing, analysis, and experience of many users and manufacturers. Where specific manufacturer's recommendations are made, those recommendations shall supersede the recommendations of this document.This document describes the successful procedures and practices associated with brake hose assemblies usage by a wide cross section of manufacturers and users over several years. The practices are expected to be applicable to all brake hose assemblies which qualify under SAE J1401.